Needle Needs Complete Kit 2 - Special Offer including:
Necessaire Floor Stand
The fabulous, unique 'Necessaire' Floor Stand allows you to simply rest your frame on the adjustable arms.
It is beautifully balanced and will not tip over! The extended arms and narrow legs enable the work to be positioned very close to you in any sitting position, thus releaving the strain on your back, neck and shoulders.
The periscope action of the pedestal enables easy height adjustment, up to normal desk height and our special support feature allows the top to be used flat or comfortably angled, without any risk of collapse.
The special adjustable support arms accommdate any frame with a maximum height of 18" (45cm) and widths of 10" - 36" (25cm - 92cm).
To get to the back of your frame, you can simply lift it and turn it around - "Lift & Flip!". With other stands, you generally need to arkwardly twist the frame, often risking damage to your work, to end the threads. The frames are held firmly in place by your wrist which usually rests lightly on the corner.
It is beautifully balanced and will not tip over! The extended arms and narrow legs enable the work to be positioned very close to you in any sitting position, thus relieving the strain on your back, neck and shoulders.
The periscope action of the pedestal enables easy height adjustment, up to normal desk height and our special support feature allows the top to be used flat or comfortably angled, without any risk of collapse.
The special adjustable support arms accommdate any frame with a maximum height of 18" (45cm) and widths of 10" - 36" (25cm - 92cm).
To get to the back of your frame, you can simply lift it and turn it around - "Lift & Flip!". With other stands, you generally need to arkwardly twist the frame, often risking damage to your work, to end the threads. The frames are held firmly in place by your wrist which usually rests lightly on the corner.
The normal legs stand 1.25" (3cm) high, and the spread is approximately 19" (48cm) at their widest part.
Millennium Frame
1 x 20" bars
1 x FREE 12" bars
1 x 8" - 10" side stretchers
Please note, the bar sizes relate to your maximum fabric width and the side stretchers refer to the exposed stitching area from top to bottom.
Magnifier / Light
Our new low energy daylight bulb provides excellent colour rendering, has a soft directional beam that allows you to focus on your work area for extended periods of time.
The lamp is separate from the lens and is designed so that the light comes in from the side under your hand, therefore not producing shadows on your work area.
The new daylight bulb gives approximately 50 watts of light but only consumes 11 watts of power. Due to it's low energy consumption and efficiency, it produces considereably less heat than conventional light bulbs.
These bulbs are also the same as those used in light boxes to treat sufferers of "S.A.D." (seasonal affective discorder) and may be of additional benefit to those who experience "the winter blues".
THIS IS A 240 VOLT BULB (EU/UK ONLY)
You will require a step-up transformer to use our daylight bulbs in the U.S. or other countries using 110 volt power supplies.
The Lens
Clarity
Are you aware lenses vary greatly? The clarity of our 5 diopter magnifier is of prime importance. The clearer it is the longer you can work.
Our lens has supreme crystal clarity and there is absolutely no distortion across its entire surface.
Great care has been taken to provide the best quality lens we can find to protect your health. Poor lenses cause headaches and dizziness and induce eyestrain.
Size
The lens should be large enough to peer through comfortably with both eyes without the
edge entering your line of vision. You will find our high quality, large 5" (127mm) lens an
optimum size.
Rims
You are best to work with a rimless lens. Distracting rims contribute to your eye fatigue. Besides creating a "dead" area around which to work, they diffuse your vision, thereby prematurely tiring your eyes.
The Other Features
Positioning
The positioning of angle poises and poor quality flexiarms can be extremely frustrating. You may have experienced the problem! Avoid this irritation with our long, exceedingly strong flexiarms which move freely but hold firmly in place.
Clamping
A strong clamp is particularly important to hold your light firmly in place. Our specially
designed extra-strong clip provides ample strength.
Portability
The clip-on models are designed to be light weight and portable, affording you great versatility in the home, the office or in the classroom. The flex is 3 metres long. Our acrylic lenses are protected by a toughened coating (to reduce scratching) and come with a protective cloth cover.
Satisfaction Guaranteed
Our stylish "Ogle Goggle" lights have been designed with your health and comfort in mind. We constantly strive to produce the very best quality and functionality in all our products to increase your working enjoyment.